FD60

FDR 1G Internal Plywood Paint Grade Glazed FD60 Fire Door

Name: FDR 1G Internal Plywood Paint Grade Glazed FD60 Fire Door
Brand: Fire Door Range
SKU: 1g-internal-plywood-paint-grade-glazed-fd60-fire-door

£565.00 ex. VAT(£678.00 inc. VAT)

Plywood finish · range £565.00–£775.00 by finish

Lead Time: 2-3 Weeks From Order Confirmation

UK mainland delivery £140.00 flat rate per order — any quantity

Finish: Plywood

Size

Material: Paint Grade Plywood

Quantity

Fire Certified

Fast Delivery

Secure Payment

The FDR 1G Internal Plywood Paint Grade Glazed FD60 Fire Door is a FD60-rated glazed internal fire door supplied as a single-leaf fire door, faced in Paint Grade Plywood. As a FD60 door it is built to resist the passage of fire for 60 minutes — the integrity period defined by the UK and European fire-door test standards, BS 476: Part 22 and BS EN 1634-1.

FD60 fire performance

FD60 denotes 60 minutes of fire resistance, achieved by a dense solid core around 54mm thick. Internal fire doors like this one maintain compartmentation within a building — holding back fire and smoke between areas and protecting the escape routes occupants rely on, a duty placed on the responsible person by the Regulatory Reform (Fire Safety) Order 2005. For the rating to perform as tested, the doorset must be hung with compatible intumescent seals and certified ironmongery, and kept in good working order.

Vision panel & glazing

This is a glazed configuration with a 1G fire-rated vision panel. Fire-resistant glazing lets natural light through and gives visibility along a corridor or between rooms while preserving the door's 60 minutes integrity. Glazed fire doors are common where sightlines or daylight matter — corridors, receptions, classrooms and communal circulation routes.

Paint-grade plywood face

The leaf has a paint-grade plywood face: a smooth, knot-free surface engineered to be decorated on site. It primes and paints cleanly for a flat, even finish in any colour, and is the most cost-effective way to specify a certified fire door at volume — flat entrances, HMOs, communal corridors and commercial fit-outs where doors are painted rather than shown as natural timber. Whichever face you choose, the FD60 fire-resisting core is identical — the finish is cosmetic and does not change the door's tested fire performance. Available in Plywood, Ash, Beech, Maple, Oak and Walnut — choose the finish that matches your scheme at the point of order. Supplied in standard stock sizes, ready to hang.

Where this door is used

FD60 doors are specified where a longer 60-minute period is required — between higher-hazard areas, basements, plant and riser rooms, in many commercial and industrial settings, and wherever a fire strategy or building control officer calls for FD60 rather than FD30. The longer rating comes from a heavier, thicker core, so FD60 doorsets are weightier and need hinges and a closer rated for the load. If you are unsure which rating your project needs, your fire risk assessment or building control officer will specify it.

Certification & documentation

Every door we supply is manufactured to resist fire for 60 minutes and tested to the recognised standards BS 476: Part 22 and BS EN 1634-1. It is supplied with its manufacturer Declaration of Performance (DoP) and test certificate, and — where the product line carries it — third-party CERTIFIRE or BWF-CERTIFIRE certification: the documentary evidence Building Control and the Building Safety Regulator expect for the golden thread. Keep that paperwork on file for the lifetime of the building.

Installation, frames & smoke seals

For its FD60 rating to perform, this door must be hung in a compatible certified frame with the correct intumescent and, where required, cold-smoke seals, and gaps of 2–4mm maintained around the leaf. Most FD60 doors in residential and communal settings are specified as FD60S — the “S” denoting smoke seals. We can supply the matching frame and certified ironmongery, and install to BS 8214 through our FIRAS and BM TRADA Q-Mark certified fitting teams.

Fire rating: FD60 (60 minutes)
Use: Internal
Configuration: Single leaf
Glazing: Glazed — 1G
Material: Paint Grade Plywood
Finishes: Plywood, Ash, Beech, Maple, Oak and Walnut
Sizes: 1981 x 762 x 54mm, 1981 x 838 x 54mm, 2040 x 726 x 54mm, 2040 x 826 x 54mm, 2040 x 926 x 54mm
Test standards: BS 476: Part 22 · BS EN 1634-1
Lead time: 2–3 weeks from order confirmation

Frequently asked questions

Is the FDR 1G Internal Plywood Paint Grade Glazed FD60 Fire Door a certified fire door?

Yes. Like every door we supply, it is manufactured to resist fire for 60 minutes and tested to BS 476: Part 22 and BS EN 1634-1, and is supplied with its Declaration of Performance and test certificate (with third-party CERTIFIRE / BWF-CERTIFIRE certification where the product line carries it). See our fire door certification guide for how to verify the evidence on any certified door.

Does this door come with smoke seals?

Most FD60 doors for residential and communal use are specified as FD60S — the “S” denotes cold-smoke seals, which are required at flat entrance doors and most internal fire doors in residential buildings. We can supply the door with the correct intumescent and smoke seals for your application; let us know at the quote stage if you need a configuration without smoke seals.

What sizes does this door come in?

It is supplied in 5 stock sizes: 1981 x 762 x 54mm, 1981 x 838 x 54mm, 2040 x 726 x 54mm, 2040 x 826 x 54mm, 2040 x 926 x 54mm (mm). If your opening doesn’t match a stock size, we also manufacture this door range made to measure.

What finishes is this door available in?

It is available in Plywood, Ash, Beech, Maple, Oak and Walnut. Choose your finish at the point of order; the price shown updates to match the selected finish.

How long is delivery?

Lead time is typically 2–3 weeks from order confirmation. Doors are delivered on a pallet by dedicated freight across mainland UK; someone should be available to receive and help unload the delivery.

Fire door certification explained Installation service Fire door inspections