FD30

FDR 3G Internal Plywood Paint Grade Glazed Double FD30 Fire Doors

Name: FDR 3G Internal Plywood Paint Grade Glazed Double FD30 Fire Doors
Brand: Fire Door Range
SKU: 3g-internal-plywood-paint-grade-glazed-double-fd30-fire-door-s

£718.00 ex. VAT(£861.60 inc. VAT)

Plywood finish · range £718.00–£1158.00 by finish

Lead Time: 2-3 Weeks From Order Confirmation

UK mainland delivery £140.00 flat rate per order — any quantity

Finish: Plywood

Size

Material: Paint Grade Plywood

Quantity

Fire Certified

Fast Delivery

Secure Payment

The FDR 3G Internal Plywood Paint Grade Glazed Double FD30 Fire Doors is a FD30-rated glazed internal fire door supplied as a double-leaf doorset, faced in Paint Grade Plywood. As a FD30 door it is built to resist the passage of fire for 30 minutes — the integrity period defined by the UK and European fire-door test standards, BS 476: Part 22 and BS EN 1634-1.

FD30 fire performance

FD30 denotes 30 minutes of fire resistance, achieved by a dense solid core around 44mm thick. Internal fire doors like this one maintain compartmentation within a building — holding back fire and smoke between areas and protecting the escape routes occupants rely on, a duty placed on the responsible person by the Regulatory Reform (Fire Safety) Order 2005. For the rating to perform as tested, the doorset must be hung with compatible intumescent seals and certified ironmongery, and kept in good working order.

Vision panel & glazing

This is a glazed configuration with a 3G fire-rated vision panel. Fire-resistant glazing lets natural light through and gives visibility along a corridor or between rooms while preserving the door's 30 minutes integrity. Glazed fire doors are common where sightlines or daylight matter — corridors, receptions, classrooms and communal circulation routes.

Paint-grade plywood face

The leaf has a paint-grade plywood face: a smooth, knot-free surface engineered to be decorated on site. It primes and paints cleanly for a flat, even finish in any colour, and is the most cost-effective way to specify a certified fire door at volume — flat entrances, HMOs, communal corridors and commercial fit-outs where doors are painted rather than shown as natural timber. Whichever face you choose, the FD30 fire-resisting core is identical — the finish is cosmetic and does not change the door's tested fire performance. Available in Plywood, Ash, Beech, Maple, Oak and Walnut — choose the finish that matches your scheme at the point of order. Supplied in standard stock sizes, ready to hang.

Where this door is used

FD30 is the most common rating in residential and light-commercial buildings — flat entrance doors, HMOs, offices, and doors opening onto protected escape corridors and stairways. Thirty minutes is enough protected time for occupants to evacuate and the fire service to respond in the building types where it is specified. If you are unsure which rating your project needs, your fire risk assessment or building control officer will specify it.

Double-leaf doorset detail

Supplied as a matched pair for wider openings and main circulation routes, the two leaves meet at a rebated or astragal meeting stile that carries its own intumescent protection, so the central joint seals in a fire just like the door edges. Both leaves must close and latch fully — on a pair that usually means a door selector or coordinator so the leaves close in the correct order, plus a closer on each leaf. Order the pair together so the meeting stiles, seals and ironmongery are matched as a set.

Certification & documentation

Every door we supply is manufactured to resist fire for 30 minutes and tested to the recognised standards BS 476: Part 22 and BS EN 1634-1. It is supplied with its manufacturer Declaration of Performance (DoP) and test certificate, and — where the product line carries it — third-party CERTIFIRE or BWF-CERTIFIRE certification: the documentary evidence Building Control and the Building Safety Regulator expect for the golden thread. Keep that paperwork on file for the lifetime of the building.

Installation, frames & smoke seals

For its FD30 rating to perform, this door must be hung in a compatible certified frame with the correct intumescent and, where required, cold-smoke seals, and gaps of 2–4mm maintained around the leaf. Most FD30 doors in residential and communal settings are specified as FD30S — the “S” denoting smoke seals. We can supply the matching frame and certified ironmongery, and install to BS 8214 through our FIRAS and BM TRADA Q-Mark certified fitting teams.

Fire rating: FD30 (30 minutes)
Use: Internal
Configuration: Double leaf
Glazing: Glazed — 3G
Material: Paint Grade Plywood
Finishes: Plywood, Ash, Beech, Maple, Oak and Walnut
Sizes: 1981 x 1524 x 44mm (2 x 762), 1981 x 1676 x 44mm (2 x 838), 2040 x 1652 x 44mm (2 x 826), 2040 x 1852 x 44mm (2 x 926)
Test standards: BS 476: Part 22 · BS EN 1634-1
Lead time: 2–3 weeks from order confirmation

Frequently asked questions

Is the FDR 3G Internal Plywood Paint Grade Glazed Double FD30 Fire Doors a certified fire door?

Yes. Like every door we supply, it is manufactured to resist fire for 30 minutes and tested to BS 476: Part 22 and BS EN 1634-1, and is supplied with its Declaration of Performance and test certificate (with third-party CERTIFIRE / BWF-CERTIFIRE certification where the product line carries it). See our fire door certification guide for how to verify the evidence on any certified door.

Does this door come with smoke seals?

Most FD30 doors for residential and communal use are specified as FD30S — the “S” denotes cold-smoke seals, which are required at flat entrance doors and most internal fire doors in residential buildings. We can supply the door with the correct intumescent and smoke seals for your application; let us know at the quote stage if you need a configuration without smoke seals.

What sizes does this door come in?

It is supplied in 4 stock sizes: 1981 x 1524 x 44mm (2 x 762), 1981 x 1676 x 44mm (2 x 838), 2040 x 1652 x 44mm (2 x 826), 2040 x 1852 x 44mm (2 x 926) (mm). If your opening doesn’t match a stock size, we also manufacture this door range made to measure.

What finishes is this door available in?

It is available in Plywood, Ash, Beech, Maple, Oak and Walnut. Choose your finish at the point of order; the price shown updates to match the selected finish.

How long is delivery?

Lead time is typically 2–3 weeks from order confirmation. Doors are delivered on a pallet by dedicated freight across mainland UK; someone should be available to receive and help unload the delivery.

Fire door certification explained Installation service Fire door inspections